CARPRO IronX - Iron remover
CARPRO IronX is highly efficient, acid-free and pH balanced. Stops rust stains and premature paint damage, quickly removing all the iron deposits from your vehicle!
Spraying saves time and avoids the labour-intensive fumigation used in traditional car care regimes. The formulation is safe and effective on all vehicle surfaces and will not damage transparent coatings. This preventive method puts an end to premature corrosion.
No other method cleans paint and wheels as deeply as IronX. Chemical compounds and iron particles are airborne and penetrate the paint to form corrosive compounds that corrode the paint undercoat. This is a gradual process that is not obvious until it is too late.
When driving, a lot of brake dust and iron particles fly on the rims as well as on the body.
Brake dust contains high levels of iron and is extremely difficult to dissolve or remove without harsh chemicals. IronX opens up the pores in the paint to release iron particles and neutralise corrosive compounds in the paint substrate.
IronX is sprayed as a clear liquid. When the cleaning fluid starts to soak into the dirt, the formulation turns purple or red.
Widely used by body shops, car washers and even dealers to prepare new and used cars. It is proven to give a clean, glassy smooth vehicle, free from iron contaminants. No other iron removal product is as safe, fast and effective!
Features:
- Removes iron particles and prevents the spread of iron-related damage and helps protect the vehicle's paintwork from damage.
- Safe to use, acid-free and pH neutral (pH 6-7).
- Safe to use on ceramics, sealants and wax.
- Safe for use on rims with aluminium, chrome, alloy or clear coating.
Usage:
- Shake the bottle.
- Spray over the contaminated area.
- After 2 ~ 5 minutes, rinse off or wash off when dry (depending on environment and temperature).
- Make sure that all IronX is completely removed and then dry the vehicle!
- After use, remove the sprayer and replace the cap (to avoid leaks).
Safety:
- Test in an inconspicuous area before use.
- Do not use on anodised surfaces.
- Do not use on unknown aftermarket finishes or cheap acrylic paints.
- Avoid the use of fabrics on convertible roofs or rubber containing recycled tyres.
- Keep out of reach of children and pets.
- Do not swallow.
- Use outdoors or in a ventilated area.
- Avoid prolonged skin contact.
- Avoid inhalation.
- Use personal protective equipment if necessary.
CARPRO DarkSide - Tyre dressing
DarkSide's formulation allows for ultra-fast and easy application with special tire or microfiber applicators, leaving a beautiful satin and glossy finish.
Each quick application of DarkSide lasts for up to 3 months!
Features:
- Very hydrophobic
- Satin black sheen
- 3+ months Duration
- UV protection
Usage:
- Clean and dry tyres thoroughly (we recommend CARPRO ReTyre).
- Spray DarkSide 2-3 times onto the tyre applicator and apply evenly to the side of the tyre.
- Avoid contact with water and allow to dry for 1-2 hours.
Safety:
Keep out of reach of children!
Inhalation may cause allergy or asthma symptoms or breathing difficulties!
May cause an allergic skin reaction or irritation.
Wear safety goggles, protective mask, protective gloves, protective clothing!
Do not eat, drink or smoke while handling the product!
IN CASE OF EYE INJURY, rinse gently with water for several minutes. Remove contact lenses if worn and if easy to remove. Seek medical advice if necessary.
Keep away from heat sources, hot surfaces, sparks, flames and other sources of ignition!
Avoid release into the environment!
CARPRO Tire Swipe applicator
The new CARPRO Tire Swipe Applicator includes a host of improvements! The denser foam allows for easier tire application, while the asymmetric radius allows for use on a wide variety of tire profiles! Nobody likes to get tyre smear on their rims or hands, and the new CARPRO Tire Swipe Applicator avoids all that! Get your CARPRO Tire Swipes today!
Features:
- Special shape
- Resilience
- Quality
- Handle with firm grip
Reviews
There are no reviews yet