Your Cart

Bad Boys Solvent kit 3x 500ml

The set includes:

1x Bad Boys Bug remover 500ml - Insect spot remover
1x Tar&Glue remover 500ml - Pigment Remover
1x Traffic Film remover 500ml - Leach remover


1 Bad Boys Bug Remover - Insect spot remover

Bad Boys Insect Remover effectively removes dried insect remains & bird droppings.

Product info:
An effective tool for removing organic dirt.
The product is suitable for use on lacquered, glass, plastic, painted, polished metal, chrome, anodised, powder coated, carbon fibre and vinyl surfaces.
Safe for surfaces to be cleaned when used as recommended.
Ready to use.

Shake the bottle before use.
Spray the product onto dirty surfaces from a distance of about 15cm.
Allow to act for 3-5 minutes.
Rinse the surface with pressurised water.
Repeat the action if necessary.


2 Bad Boys Tar&Glue Remover 500ml - Pigment Remover

An extremely strong pig remover designed to remove heavy pitch, tar, asphalt stains and traces of glue from bodywork, windows and rims.


  • It also dissolves oil stains, grease, silicones, wax and rubber chips.
  • Ideal for use before polishing or waxing.

For best results, we recommend cleaning the bodywork of road dust beforehand. Traffic Film Remover and then With iron remover.
Spray the pig remover onto the surface to be cleaned until you notice the formation of a reaction zone (the surface to be cleaned must be dry).
If necessary, the product can be treated on the body with a brush or a fibre brush in hard-to-reach areas (e.g. rim spacing, etc.).
Do not allow the product to dry on the surface!
Rinse surfaces with pressurised water.
Wash the vehicle thoroughly with shampoo.
Repeat the process if necessary.


3 Bad Boys Traffic Film Remover - Leachable film remover

The solvent removes dust, stubborn dirt and grease from the surface.
  • It is a concentrate - Dilute 1:10.
  • For the removal of normal dust as well as heavier dirt
  • Baseline pH level
  • Pleasant smell
  • A solution ratio of more than 1:20 is also safe for ceramics and waxes.

Shake the bottle before use.
Recommended dilution 1-10% of water.
Spray the solution onto the surface, moving upwards.
Allow the solution to act on the surface for up to 5 minutes.
Rinse the vehicle with pressurised water.
Wash surfaces thoroughly with shampoo.

When using for the first time, test the instrument in a less visible place.
Make sure the surface to be washed is cool before applying the product.
Do not use in direct sunlight.
Store in a dry and cool place at 5-25°C
Do not allow the product to freeze or overheat.


Keep out of reach of children!
Inhalation may cause allergy or asthma symptoms or breathing difficulties!
May cause an allergic skin reaction or irritation.
Wear safety goggles, protective mask, protective gloves, protective clothing!
Do not eat, drink or smoke while handling the product!
IN CASE OF EYE INJURY, rinse gently with water for several minutes. Remove contact lenses if worn and if easy to remove. Seek medical advice if necessary.
Keep away from heat sources, hot surfaces, sparks, flames and other sources of ignition!
Avoid release into the environment!



There are no reviews yet

Only logged in customers who have purchased this product may leave a review.