CARPRO Solvent kit 2x 500ml

CARPRO Solvent kit 2x 500ml

CARPRO BugOut - Insect spot remover

Once the enzymes and proteins inside the insect are attached to the surface of the car, they harden to the paint and can even corrode if left too long. Some insects may also have hard shells or fragments that will easily scratch the paint if an attempt is made to remove them without first softening their sun-dried remains.

In the worst case, you leave the insects on the surface too long and they will eat deep into the paint, causing permanent damage that cannot be repaired without painting!

CARPRO BugOut safely and easily removes insect traps while cushioning hard chitinous shells for safe removal. BugOut is designed to be safe on a wide variety of surfaces, including paint, varnish, PPF, glass, plastic, metal and more. It melts dried residue in an instant, allowing for easy wiping and/or rinsing.

Features:

• Dissolves insect stains quickly
• Non-splash foam
• Safe for ceramic coated surfaces, glass and PPF
• pH 10

 

CARPRO IronX - Iron remover

CARPRO IronX is highly efficient, acid-free and pH balanced. Stops rust stains and premature paint damage, quickly removing all the iron deposits from your vehicle!
Spraying saves time and avoids the labour-intensive fumigation used in traditional car care regimes. The formulation is safe and effective on all vehicle surfaces and will not damage transparent coatings. This preventive method puts an end to premature corrosion.

No other method cleans paint and wheels as deeply as IronX. Chemical compounds and iron particles are airborne and penetrate the paint to form corrosive compounds that corrode the paint undercoat. This is a gradual process that is not obvious until it is too late.

When driving, a lot of brake dust and iron particles fly on the rims as well as on the body.
Brake dust contains high levels of iron and is extremely difficult to dissolve or remove without harsh chemicals. IronX opens up the pores in the paint to release iron particles and neutralise corrosive compounds in the paint substrate.

IronX is sprayed as a clear liquid. When the cleaning fluid starts to soak into the dirt, the formulation turns purple or red.
Widely used by body shops, car washers and even dealers to prepare new and used cars. It is proven to give a clean, glassy smooth vehicle, free from iron contaminants. No other iron removal product is as safe, fast and effective!

Features:

• Removes iron particles and prevents the spread of iron-related damage and helps protect the vehicle's paintwork from damage.
• Safe to use, acid-free and pH neutral (pH 6-7).
• Safe to use on ceramics, sealants and wax.
• Safe for use on rims with aluminium, chrome, alloy or clear coating.

Usage:

• Shake the bottle.
• Spray over the contaminated area.
• After 2 ~ 5 minutes, rinse off or wash off when dry (depending on environment and temperature).
• Make sure that all IronX is completely removed and then dry the vehicle!
• After use, remove the sprayer and replace the cap (to avoid leaks).

Safety:

• Test in an inconspicuous area before use.
• Do not use on anodised surfaces.
• Do not use on unknown aftermarket finishes or cheap acrylic paints.
• Avoid the use of fabrics on convertible roofs or rubber containing recycled tyres.
• Keep out of reach of children and pets.
• Do not swallow.
• Use outdoors or in a ventilated area.
• Avoid prolonged skin contact.
• Avoid inhalation.
• Use personal protective equipment if necessary.